Originally posted by dr.dirty
View Post
Announcement
Collapse
No announcement yet.
14 bolt and HP dana 60 in a JK
Collapse
Forum Thread First Post
Collapse
X
-
[CENTER][COLOR=#ff0000]Resistance Off Road
[/COLOR]Join the Resistance...
http://www.resistanceoffroad.us[/CENTER]
-
Got my rear coilover towers in today. Need to do some patch work on the frame where my old bump cans were at. Also need to fill the tub in before welding the tower in.
[COLOR="YellowGreen"]"You cant fit 2 fingers in my tailpipe"[/COLOR]
Comment
-
Finished up the rear towers. I need to order some resi mounts and paint it all up. But FINALLY she stood on her own feet
Also finished up welding the rear truss, lcas........[COLOR="YellowGreen"]"You cant fit 2 fingers in my tailpipe"[/COLOR]
Comment
-
Rear is done minus new brake lines.
This is whats left to do:
Drill pitman arm for #/4 bolt
Trim front fenders
Replace rear brake lines
New front drive shaft
Adjust and tighten all control arm Joints
Go over and recheck all fasteners
Add gear Fluid
So its getting really close to being finished
VKS Fab 14 bolt tone rings pressed on the hubs
Rear all prettied up
Rear full bump
All buttoned up
The rear sits a tad high because I dont have the spare on at the moment and all my trail crap in the back
[COLOR="YellowGreen"]"You cant fit 2 fingers in my tailpipe"[/COLOR]
Comment
-
That's one bad ass 4 door[COLOR="#FF0000"]R[/COLOR]edneck [COLOR="#FF0000"]D[/COLOR]riveway [COLOR="#FF0000"]F[/COLOR]ab
www.DanielBuck.net - www.DNSFAIL.com - www.FurnitureByBuck.com
Comment
-
Looks good. When are we gonna go scratch it?[CENTER][COLOR=#ff0000]Resistance Off Road
[/COLOR]Join the Resistance...
http://www.resistanceoffroad.us[/CENTER]
Comment
-
Do you guys see an issue running a one inch wheel spacer on my 14 bolt to get it the same WMS as my front dana 60?
I used the longer dorman studs and they are 2 3/8 left from the WMS.
these are what I would run. I would knock the studs out that come with them and just slide them over the existing studs.
Thoughts?[COLOR="YellowGreen"]"You cant fit 2 fingers in my tailpipe"[/COLOR]
Comment
-
Yeah I know thats why the rear is narrower so the rear wheels follow the front better but I just thought that 4.25 was really narrow. Ill leave it be for now and see how goofy it looks[COLOR="YellowGreen"]"You cant fit 2 fingers in my tailpipe"[/COLOR]
Comment
Comment