lil bit of tinkering

[daniel_buck]

haha, I like it! :-D

[aw12345]

Farted around with a few more pieces to the puzzle. Has been since high school that I messed with a mill

[vwtipeii]

looks like you are having some fun with her Art! You never did mention what engine, tranny and tcase combo you are running...

[aw12345]

Yes I did several times, guess reading is a lost art Skeeter, your baby almost done yet?

[vwtipeii]

see my thread... and you will see where she is

I went back about 5-6 pages... and didn't see it listed... its ok if you don't want to tell me... I will live.

[aw12345]

Nissan Pathfinder running gear for now

[aw12345]

Starting to look like the real thing.

[Toolman]

you don't need the TCM if you're using that clever little switch I gave you.

[aw12345]

Another puzzle piece done

[aw12345]

you don't need the TCM if you're using that clever little switch I gave you.

Don't think it's quite that easy, Nissan transmission compared to an AW4 has no mechanical throttle valve to raise oil pressure in the trans under higher load. Found out where the critter is located, so just more crap to wire up.
Howe is your lil project coming along? Are we ready for some hammer fun yet.

[Toolman]

almost there, it's stands on it's own but I've got some steering to figure out yet and a few other little goodies need get installed first. I'll be at KOH either way, with or without the TJ

[aw12345]

almost there, it's stands on it's own but I've got some steering to figure out yet and a few other little goodies need get installed first. I'll be at KOH either way, with or without the TJ

Well see ya there Mike, looks like I will be a busy boy that week, oh the fun of it

[jonah]

A mill can be really handy, sure makes a lot of things possible. Definitely like the jeep grill, can't go wrong. However, this would be pretty sweet (although a bit pricy):

http://www.ebay.com/itm/ROLLS-ROYCE-...538#vi-content

[Toolman]

I like the mill work on the knuckle, makes it look easy. See you out there

[aw12345]

Started playing with the steering some more, making progress