lookin really nice chuck,, sweet wheels!!!
Announcement
Collapse
No announcement yet.
CJ7 Build Part 2 aka Stopping the Flopping
Collapse
Forum Thread First Post
Collapse
X
-
Originally posted by aw12345 View PostChuck have you thought about an Astro van steering box?
Those have the pitman arm sticking forwardCheck out .
Comment
-
Check out .
Comment
-
-
Looking good Chuck. Must feel great to at least see the wheels in place. I forgot what it looks like! How are the control arms panning out?[CENTER][COLOR=#ff0000]Resistance Off Road
[/COLOR]Join the Resistance...
http://www.resistanceoffroad.us[/CENTER]
Comment
-
Originally posted by Hook&Ladder View PostWas blue the only paint can left on the shelve at the store! Look'n good Chuck, you still think your gonna make the march date?
Originally posted by rat patrol View PostHow are the control arms panning out?Check out .
Comment
-
Made some good progress today. I ended up raising the Jeep one more inch so now my belly is 23 ½”. This really helped with some clearance issues and I still have 1 ½” clearance for the garage.
I was able to get the transfer case together enough to install it for some measurements. I did find out that the Dana 300 mounting holes for the transmission are not equally spread apart. After rotating the case the bolts did not line up. Thankfully I had my old turbo 350 adapter and used it as a template for the new holes I had to drill.
Looks like I have some more floor to fabricate.
I have the axles set where I want them and where they fit. Now I’m at 100” wheel base. I think I’ll be happy with this.
Next I will be moving the engine back a little. The rear lower link mount at the frame sits to far back and rear driveshaft does not clear it enough. I want to keep the lower links at 36”.Check out .
Comment
Comment