I have an 89 Wrangler which I just put a re 4.5" extreme duty lift as well as a 1" MORE body lift and running 35's. The front end is my next step but I want to do the steering as well. I'm looking for the super box and pump out there. Also the steeering stabilizer needs to be replaced. Anyone put a dual in their Jeep? Also, someone told me a stabilizer from a YJ and a TJ are the same but I see them listed differently everywhere. Can anyone clear that up for me? Any suggestions as far as that goes would be greatly appreciated. Thanks.
Announcement
Collapse
No announcement yet.
Looking for the best Steering Box/Pump and Steering Stabilizer for my 89 YJ
Collapse
Forum Thread First Post
Collapse
X
-
http://www.myjeeprocks.com/forums/sh...eering+upgrade
brian did this.... the search function works pretty well
howe is also a good one to go with.
agr is not.>>>>>>>>>>>>>>>>>>>>>>>>>>
ERIK
95 yj, locked lifted, and ready to rock!
-
all of the AGR stuff is pretty shotr on quality control.
http://www.howeperformance.com/rockcrawling.html
http://www.howeperformance.com/>>>>>>>>>>>>>>>>>>>>>>>>>>
ERIK
95 yj, locked lifted, and ready to rock!
Comment
-
i have the AGR stuff, that is how i know first hand that their parts lack quality control.
steering to the right is softer than the left, and the pump is noisey as hell.
howe makes good stuff, but it is a bit more expensive. brian [blktj] should be in on this conversation as he has the howe box.:yay:>>>>>>>>>>>>>>>>>>>>>>>>>>
ERIK
95 yj, locked lifted, and ready to rock!
Comment
-
I was just checking out the Howe stuff. How exactly do they work? Are they new boxes and pumps? Did blktj do the box/pump/ram? How does he like it? Any problems? What Ram did he use? I am also thinking about running a M.O.R.E. shackle reversal system to help the bump/steer. I am running a RE 4.5" extreme duty lift with a 1" M.O.R.E. body lift kit right now but I am thinking about a Spring over Axle conversion. Any opinions? Thanks.
Comment
-
I actually have all PSC components... pump, box and resevoir. The stuff seems to work well.
the box is ported for hydro assist but it is not in use at the moment.
Howe is good stuff.
Lee mfg in sun valley makes good boxes as well.
Comment
-
I have Erik's stock YJ steering stabilizer on my TJ, which has an XJ front axle.
Comment
-
I haven't had any problems with my AGR stuff, but I have the P pump.1986 CJ-7; 4.6L stroker, balanced & blueprinted; 5" lift, 35x1250 MTRs, Poison Spyder Full Width kit,
My Jeep
Moab Rocker Knocker Video:shades:
Comment
-
The 1st thing you should do, is find a steering gear rebuilder around your area. These guys will usually be able to build you exactly what you want for less than many other units.
If that fails, try west texas off-road. They make good, affordable boxes, pumps and other steering componants.
Comment
Comment