Announcement

Collapse
No announcement yet.

Home Made Disconnects for a TJ

Collapse

Forum Thread First Post

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Home Made Disconnects for a TJ

    Ive had a few people ask me for these pics...so here ya are...

    The parts can be bought at Home Depot for about $5...
    (2) 2 1/2" long, 7/16" pins with holes
    (2) heavy duty cotter pins (get spares)
    (4) washers

    I'm thinking I like these as much as store bought disconnects...

    anyway...here it is:



    here they are connected:



    here they are disconnected...



    I tuck my arms up in that pocket, though I don't know if all TJ years have it...they stay up there with no problem...I know that the Rubicons cant get them in there...


    Let me know if you have any questions...

    Tam
    (I know I WAS rubbing... ...I have spacers now )

    Check out this article in our features section:
    http://www.myjeeprocks.com/features/...TJ_Disconnects
    Last edited by Dukes69; 04-01-09, 03:22 PM.
    2002 TJ on 35s a bit of lift with some stuff
    Rock-ItMan all the way around

  • #2
    Re: Home Made Disconnects for a TJ

    Originally posted by JeepGal
    I tuck my arms up in that pocket, though I dont know if all tj years have it...they stay up there with no problem...I know that the Rubicons cant get them in there...
    Actually, I came up with a fix for that problem. I was jealous, and I wanted my links up in the pocket too.

    I took a 12" crecent wrench and bent the offending piece of sheet metal out of the way so the sway bar can be pushed up another inch, which allows the link end to get into the "pocket".
    olllllllo <--- If you can read that, roll me over!

    Price is soon forgotton, quality is not.

    KG6OWO

    Comment


    • #3
      Cool Disco's, I made a disconnect for YJ track bars using those pins. But then again, what YJ needs track bars. I use the pins on my sway-bar disco, good ol pry off sway bar technique.
      Screw you guys, I'm goin' to pismo.

      Comment


      • #4
        Fyi, this is only good for about 2-3" of spring lift. More than that and the angle of the sway bar becomes to much for it to operate properly connected. just my $.02.
        myJeeprocks.com

        "in the end... the rocks always win."

        Comment


        • #5
          nice write up tam!
          >>>>>>>>>>>>>>>>>>>>>>>>>>
          ERIK


          95 yj, locked lifted, and ready to rock!

          Comment


          • #6
            Very Nice Tammy I will say that these work just as well as the $120 disco's. I've seen um in action, very cool mod.
            [COLOR=blue]Chris[/COLOR]
            SAVE JOHNSON VALLEY!!! - CLICK HERE
            Ya Savvy?

            Motech Performance

            Comment


            • #7
              I may have to Try that on mine, See if I get some more flex out of it..
              F

              '95 YJ 2.5L 5 Speed
              SOA, 33" BFG Mud Terrains
              Custom Rock Sliders
              Warn 8000# Winch

              Comment


              • #8
                Originally posted by fdeuce2x
                I may have to Try that on mine, See if I get some more flex out of it..
                I believe this will only work on TJ's. You might want to check that out before you buy all the parts.
                [COLOR=blue]Chris[/COLOR]
                SAVE JOHNSON VALLEY!!! - CLICK HERE
                Ya Savvy?

                Motech Performance

                Comment


                • #9
                  I did the same thing for my YJ since I can't use my old jks disco anymore because my coil spring conversion.
                  here the links
                  htt://photos.yahoo.com/jete_cobra under quick disconnect folder.

                  cheap and works...
                  - 1995 Wrangler 2.5L Rio Grande
                  - Tera Low T-case 4:1
                  - 5" Procomp Coil Spring Conversion
                  - ARB rear locker
                  - Advance Adapters HD SYE & HD drive shaft
                  - 4.0 TB
                  - 8mm spark plugs wire, platium +4 sparks plug
                  - MSD Coil
                  - Sanden OBA / 2.5 Gallon tank
                  - 32" BFgoodrich MT KM
                  - K&N filter
                  - Flowmaster
                  - http://www.imagestation.com/album/?id=4289014783
                  - http://www.imagestation.com/album/?id=4289209255
                  - http://www.imagestation.com/album/?id=4290317405

                  Comment


                  • #10
                    Im bringing this thread back to LIFE because i want to know if this will work on an XJ with 2 inches of lift?
                    B R E T T
                    87 XJ 3" lift, 31s-thats all thats worth mentioning

                    Comment


                    • #11
                      Originally posted by JeepJunkie
                      Im bringing this thread back to LIFE because i want to know if this will work on an XJ with 2 inches of lift?
                      Its possible that it can work for an XJ . . . you just need to figure out how. The pin is the same, but XJ sway bar links dont have the little swivel deal where they connect to the sway bar. They just have a rubber bushing. You can probably use the pin and figure out a way to swing the whole mess up and out of the way.

                      Zip Ties!
                      [COLOR=blue]Chris[/COLOR]
                      SAVE JOHNSON VALLEY!!! - CLICK HERE
                      Ya Savvy?

                      Motech Performance

                      Comment


                      • #12
                        well it works it is just HARD to get the sway bar re-aligned, but it could be for 2 reasons; 1:my car isnt on level ground and 2: the backend is jacked up with the axle drooping

                        I think if it was flat it would work tho, ill have to find out later when im sittin level.
                        B R E T T
                        87 XJ 3" lift, 31s-thats all thats worth mentioning

                        Comment


                        • #13
                          Originally posted by JeepJunkie
                          I think if it was flat it would work tho, ill have to find out later when im sittin level.
                          yeah, it can be tough to do. i hate that part
                          :gun:'99 TJ Sport:gun:

                          Comment


                          • #14
                            In other words...

                            Its normal to have problems getting the swaybar hooked back up if youre not on level ground.

                            Tam
                            2002 TJ on 35s a bit of lift with some stuff
                            Rock-ItMan all the way around

                            Comment


                            • #15
                              yeah, what she said
                              thanks tam
                              :gun:'99 TJ Sport:gun:

                              Comment

                              Working...
                              X