A few weeks ago Scott AKA Dr. Dirty had build me a GENRIGHT Style front bumper from my existing Smittybilt $99 dollar bumper and I think he did a heck of a job. Thanks!
The second part of this bumper build was to shorten the bumper by 4 total inches.
Re-weld the ends onto the bumper.
Then Weld the winch plate to the bumper.
Here are a few pics thanks to Dirty and Finishline West.
After the first build notice the bumper extends into the tires:

Next we cut 2 inches on each side:


Then after welding the ends back on Scott welded up the rest of the bumper:



A little Duplicolor:


And the finish product:

Thanks again buddy you worked hard this winter break!
The second part of this bumper build was to shorten the bumper by 4 total inches.
Re-weld the ends onto the bumper.
Then Weld the winch plate to the bumper.
Here are a few pics thanks to Dirty and Finishline West.
After the first build notice the bumper extends into the tires:

Next we cut 2 inches on each side:


Then after welding the ends back on Scott welded up the rest of the bumper:



A little Duplicolor:


And the finish product:

Thanks again buddy you worked hard this winter break!
Comment