4.5" Superflex kit questions

[jmbrowning]

Well, it's lift time...warranty be damned.

The lift is mostly RE Superflex...full set of control adj control arms and assorted tidbits from other manufacturers. Springs will be 4.5" OME.

Will this setup accommodate 35's or 315/70R16's without a body lift?

What rub issues will there be with Moab rims? Will SpiderTrax 1.25" spacers at all the corners be adequate to prevent control arm rub?

Can't wait!

[igofshn]

It will rub. You will need a 1" bl.

[Dukes69]

Not sure about the B/L, but if it rubs on the control arms, adjust the steering stops. You will probably need the wheel spacers to keep the tires out of the spring perches.