Announcement

Collapse
No announcement yet.

4.5" Superflex kit questions

Collapse

Forum Thread First Post

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 4.5" Superflex kit questions

    Well, it's lift time...warranty be damned.

    The lift is mostly RE Superflex...full set of control adj control arms and assorted tidbits from other manufacturers. Springs will be 4.5" OME.

    Will this setup accommodate 35's or 315/70R16's without a body lift?

    What rub issues will there be with Moab rims? Will SpiderTrax 1.25" spacers at all the corners be adequate to prevent control arm rub?

    Can't wait!
    Quis custodiet ipsos custodes?
    2003 TJ Rubicon: 4.5" OME coils; RE SF2; NthDegree TT/oilpan skid/shock shifters; FXD rock rails; Anti-Rock; 5150'

  • #2
    It will rub. You will need a 1" bl.
    1994 Toyota, dual cases, 5.29 axles with ARB's

    Comment


    • #3
      Not sure about the B/L, but if it rubs on the control arms, adjust the steering stops. You will probably need the wheel spacers to keep the tires out of the spring perches.
      [COLOR=blue]Chris[/COLOR]
      SAVE JOHNSON VALLEY!!! - CLICK HERE
      Ya Savvy?

      Motech Performance

      Comment

      Working...
      X