Ok i got a 4inch susp lift on my 97 wranlger...can i put a 2inch coil spacer in the front and 1.75 coil spacer in the rear....will i have to change anything out?
Announcement
Collapse
No announcement yet.
spacer lift
Collapse
Forum Thread First Post
Collapse
X
-
Assuming your running short arms that will put a pretty high angle on your arms and your steering will be at some ugly angles aswell (assuming again you have stock stering) causing bump steer most likely. I would try to stay with about an 1" spacer. Why do you need to go bigger? 4" lift should be good for about 35s. Have you thought about maybe a 1" body lift for clearance?|90 XJ|4.0|AX-15|NP231|RE H&T|TnT Y-Link|RE Coils|BOR Leaves|ACOS|D30/Aussie|8.8/ARB|35" Kevlar MTRs|Custom Exo,Sliders,Bumpers|
!!! outdoorlogic.net !!!
-
well im running 33's but i got a 9500 winch and my front end sags...so i was going to put my tire on the back a 33'' so i will kinda level out. so i was just going to put a spacer in front and back to give me some more hight. And im not a big fan of the BL. and alittle bit more work i cant do. But i dont want to spend to much for a small boost
Comment
-
I would say do a 1" body lift, 1" spacer, or both if youd like. But to big of coil spacers give you problems.|90 XJ|4.0|AX-15|NP231|RE H&T|TnT Y-Link|RE Coils|BOR Leaves|ACOS|D30/Aussie|8.8/ARB|35" Kevlar MTRs|Custom Exo,Sliders,Bumpers|
!!! outdoorlogic.net !!!
Comment
Comment