Any Input Would Be Appreciated, I Want To Swap Full Traction 4" Coils For 4.5" Coils Front And Rear. I Have The 4" Full Traction Long Arm Suspension. Other Than Also Replacing The Shocks,,, Will I Need To Have The Length Of The Long Arms Adjusted To Accomodate The Slight Extra Lift?
Announcement
Collapse
No announcement yet.
4.0" To 4.5" Coil Spring Swap
Collapse
Forum Thread First Post
Collapse
X
-
possibly might need to adjust the uppers for the pinion angle. I didnt do that after I did my Rubi case and am still trying the get the vibes out of the front end. but... half an inch might not do much so try and it and see[COLOR="Sienna"]97 TJ, 4.0 5spd, 3.5" Rock Krawler 5 inch stretch long arm, 30/44 locked with 48s, 35 inch MTRs, Warn 9k rock track 4:1, Vanco Big Brake Kit![/COLOR]
-
I don't think going from the 4" to the 4.5" springs you would have to change the shocks. Its only a half inch, and it seems shocks are sold with a 2" window.
like stock - 2", 2"-4",4"-6" (just my 2 cents) I'm sure if I'm wrong somebody will tell me. I agree with miguelitojeep97 you'll probably just need to adjust your uppers to put the pinion angles back in line
Comment
Comment