Doors off

[loop choke]

OK. This may sound like a silly question. I have an '04 Rubicon with roll up windows. I asked the dealer and they didn't know how. How do I take the doors off and keep the interior light from staying on? Any help would be appreciated.

Jason

By the way. Whoever let me change mt user ID, Thanx!!!!!

J

[H8PVMT]

In my 98 there's a fuse, I just pulled it out and it was good to go.

[sarah]

yup, check the fuse box. or you can tear apart the buttons that activate the light at the doorplate like i did, but the fuse is much easier

[sarah]

i can't believe the dealership didn't know that. :o

[JeepJunkie]

Originally posted by sarah
i can't believe the dealership didn't know that. :o

I bet if you waved a 20 at them they would suddenly know how to do it.

[king4wd]

There's little switches in the doorwells you can tape over, or you can pull fuses or you can get this new spring/clamp gizmo (carried by quadratec) that keeps the switch depressed as if the doors were on and closed. This last method is best for those of us who have anti-theft systems wired to those switches. All of these methods work and tehey're all inexpensive

[Dukes69]

Fuse number 4

[goodtimes]

Chris is right, fuse #4. There is instructions in the owners manual.

[loop choke]

I checked the owners manual and there was nothing under doors. I will check the rest of it to see if there was something I missed.

I thank you all for your help!!!!!

Jason

[Nauset]

I know.....I just went through this myself! No help from the manual. Just take out that fuse & the lights stay on ten seconds after you turn off the jeep. Otherwise you gotta manually switch it on at the the wheel.

Originally posted by loop choke
I checked the owners manual and there was nothing under doors. I will check the rest of it to see if there was something I missed.

I thank you all for your help!!!!!

Jason

[sarah]

Originally posted by Nauset
I know.....I just went through this myself! No help from the manual.

kinda silly it seems, they sure did make it easy but i guess they just expect everyone to figure it out on their own.

[goodtimes]

It's in there....at least it was in the '03 manuals. That is where I figured out which fuse it was.