does anyone run the 1" lift motor mounts? I have a YJ with a 4" lift and want to raise back up my transfer case. I know a SLE is the best way to fix the drive shaft angle, but money is tight and there's soooo much I still want to do to my jeep.
Announcement
Collapse
No announcement yet.
1" lift motor mounts
Collapse
Forum Thread First Post
Collapse
X
-
I have a SYE and still want to do a 1"MM lift. I think that with a 1"MM lift and a 1"BL I will be able to use a nearly flat transfer case skid. So go for the MM lift because you may want it anyway even with an SYE.Those left standing
Will make millions
Writing books on ways
It should have been
-Incubus "Warning"
Comment
-
I think I would do it Art's way. If art has not broken his mounts the way he wheels it's good. M.O.R.E. I think are the best ,but not cheap.IN A LAND OF FREEDOM WE ARE HELD HOSTAGE BY THE TYRANNY OF POLITICAL CORRECTNESS!!
Better To Burn Out Than To Rust Out!
Comment
-
You don't have to do them at te same time. But if you do the MM lift you will need to move the fan shroud up too. If you do the BL at the same time you will not have to move the shroud. That's if you raise the motor and the body the same height.Those left standing
Will make millions
Writing books on ways
It should have been
-Incubus "Warning"
Comment
-
Originally posted by cbz692 View PostDo I have to put the 1" body lift on before the 1" motor mount lift ?? I think I need to do that anyhow, I still rub around my rear wheel well when I go wheelin.
Comment
Comment