Announcement

Collapse
No announcement yet.

crossover/high steering

Collapse

Forum Thread First Post

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • crossover/high steering

    Has anyone done the crossover/high steering? I have a Dana 44 front axle out of a 75 blazer. I have a flat top knuckle (needs to be drilled and tapped) for the passanger side. (driver side done from factory) I been priceing around and found some at www.rockstomper.com for $80 a piece, best price I found so far. I have a friend who one made at a shop in AZ for $25 (that was just a 1" thick piece of steel cut to the shape he gave them no hole drilled ect.)Now with steering I don't want to be unsafe!!! he said he didn't have any problems what-so-ever:confused:
    75 blazer + 81 CJ-7 + 90 Wrangler = Tonka Jeep Dave

  • #2
    Dave,

    Have you seen this article?

    Hi Steer Link

    If no, not sure if this helps....


    JC
    '78 CJ-7, 304, Scout Dana 44s w/ a Detroit in the rear, T-150 w/ Dana 20, 4" Skyjacker susp and 2" body lift, 33" MT/Rs, Warn XD8000i, and others.

    '97 XJ, 4.0L, Dana 30 w/ Truetrac, Chrysler 8.25 w

    Comment

    Working...
    X