crossover/high steering

tonkadave

Proudly Serving

Join Date: Feb 2004

Posts: 217
- Share
- Tweet
#1

crossover/high steering

02-27-04, 05:28 PM

Has anyone done the crossover/high steering? I have a Dana 44 front axle out of a 75 blazer. I have a flat top knuckle (needs to be drilled and tapped) for the passanger side. (driver side done from factory) I been priceing around and found some at www.rockstomper.com for $80 a piece, best price I found so far. I have a friend who one made at a shop in AZ for $25 (that was just a 1" thick piece of steel cut to the shape he gave them no hole drilled ect.)Now with steering I don't want to be unsafe!!! he said he didn't have any problems what-so-ever:confused:

75 blazer + 81 CJ-7 + 90 Wrangler = Tonka Jeep Dave
Tags: None
jccj7

Join Date: Feb 2004

Posts: 25
- Share
- Tweet
#2

02-29-04, 07:36 AM

Dave,

Have you seen this article?

Hi Steer Link

If no, not sure if this helps....

JC

'78 CJ-7, 304, Scout Dana 44s w/ a Detroit in the rear, T-150 w/ Dana 20, 4" Skyjacker susp and 2" body lift, 33" MT/Rs, Warn XD8000i, and others.

'97 XJ, 4.0L, Dana 30 w/ Truetrac, Chrysler 8.25 w
Comment

Announcement