Announcement

Collapse
No announcement yet.

CO2 Refill?

Collapse

Forum Thread First Post

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Nice! I went with Ultimate Air.
    Check out .

    Comment


    • #47
      ok going to bump this up again.

      SO, Im thinking I dont need a fancy CO2 with the cool regulator, How many of you guys run one with a fixed regulator?
      I think that should be fine for what I am doing.

      Any negatives to running one with a fixed regulator?



      p.s. Brett!!! if you read this PM me a quote already!
      [COLOR="Sienna"]97 TJ, 4.0 5spd, 3.5" Rock Krawler 5 inch stretch long arm, 30/44 locked with 48s, 35 inch MTRs, Warn 9k rock track 4:1, Vanco Big Brake Kit![/COLOR]

      Comment


      • #48
        Mines fixed and has been trouble free.
        Check out .

        Comment


        • #49
          hey guys just wanted to bump this up and say thanks for your help. I ordered my air tank thanks to Brett at Offroad Werkz. Not in time for TDS, but still was able to bring home some cool stickers to slap on my tank. I went to AirGas today only to be told they cant fill it up for me. Only exchanges. They were nice enough to steer me over to West Air in El Cajon where I was treated very well and had my tank aired up in about 10 min. Cost me $23 though! but... after 5 fills, I get a free fill!!!! now thats a deal!
          Soon as I got home, I screwed on the regulator and took my tire down to 10psi. Had it aired up to 25psi in no time. maybe 1min. Ill do a exact test later on.


          I have one question for you guys that have these tanks. I do have a mounting bracket that came with the tank and found a great spot to put it. I am all set to put it in, and then thought...wait I am not going to have the tank in there all the time (only on 4x trips) so the mount will be hard mounted... This thing will rattle like crazy if I do that!!

          What have you guys done? Any easy way to have the bracket mounted quickly?
          [COLOR="Sienna"]97 TJ, 4.0 5spd, 3.5" Rock Krawler 5 inch stretch long arm, 30/44 locked with 48s, 35 inch MTRs, Warn 9k rock track 4:1, Vanco Big Brake Kit![/COLOR]

          Comment


          • #50
            go to a irrigation supply place and git a pvc coupling that matches the tank diameter and put that in the mount to keep it frum rattling?
            :gun: my rifle is not illegal, it's just undocumented... :gun:

            Comment


            • #51
              im sorry, what I meant was when the tank is not in the jeep, how can I keep the bracket from rattling. I dont think the tank in its mount will be that bad, just without the tank.
              [COLOR="Sienna"]97 TJ, 4.0 5spd, 3.5" Rock Krawler 5 inch stretch long arm, 30/44 locked with 48s, 35 inch MTRs, Warn 9k rock track 4:1, Vanco Big Brake Kit![/COLOR]

              Comment


              • #52
                I wrap a small bungee cord around the bracket. Works perfect.
                Check out .

                Comment


                • #53
                  yeah, that was my schtick, use the PVC coupling in place of the tank... that way the bracket thinks it's holding the tank... and shuts up!
                  :gun: my rifle is not illegal, it's just undocumented... :gun:

                  Comment


                  • #54
                    Just got a 10# power tank with bracket to mount to roll bar house and everything for $100 used once! Im really excited about it.

                    anyone ever seen anybody that runs the ARB system where you can run your ARBs off the tank??
                    Just trying to get to Cali!

                    Comment


                    • #55
                      Originally posted by KNCJeeper View Post
                      Just got a 10# power tank with bracket to mount to roll bar house and everything for $100 used once! Im really excited about it.

                      anyone ever seen anybody that runs the ARB system where you can run your ARBs off the tank??
                      what kind of bracket do you guys use to mount it to your roll bar? I got a home made setup. with a 20lb. And want it up higher to get room in the tub.
                      Ford Raptor 6.2l

                      Comment


                      • #56
                        I have not mounted mine yet, but I just have the one that comes with the Source tanks. It pretty good, but I dont want to hard mount it bc I it will be loud and rattle all kinds.
                        [COLOR="Sienna"]97 TJ, 4.0 5spd, 3.5" Rock Krawler 5 inch stretch long arm, 30/44 locked with 48s, 35 inch MTRs, Warn 9k rock track 4:1, Vanco Big Brake Kit![/COLOR]

                        Comment


                        • #57
                          Originally posted by Tomb Raider 940 View Post
                          what kind of bracket do you guys use to mount it to your roll bar? I got a home made setup. with a 20lb. And want it up higher to get room in the tub.


                          if you go on powertank.com they have brackets that fit around your roll bar and then go into whatever kind of clamp you buy to hold it in place
                          Just trying to get to Cali!

                          Comment


                          • #58
                            Originally posted by KNCJeeper View Post
                            if you go on powertank.com they have brackets that fit around your roll bar and then go into whatever kind of clamp you buy to hold it in place
                            So your thinking like a hose clamp or something. Can you point me in right direction. I tried to find oversize clamps from local hardware store and found nothing. I know of the power tank bracket. Is a nice bracket. Aluminum and 60 bucks.
                            Ford Raptor 6.2l

                            Comment


                            • #59
                              Originally posted by KNCJeeper View Post
                              if you go on powertank.com they have brackets that fit around your roll bar and then go into whatever kind of clamp you buy to hold it in place

                              Okay just bought the 20# power bracket and the red roll bar clamps. got bracket for 60 and clamps for $40. Kinda expensive but gets it out of the way. Just have to wait till the end of week when I get them, then will post pics.
                              Ford Raptor 6.2l

                              Comment


                              • #60
                                Originally posted by Tomb Raider 940 View Post
                                Okay just bought the 20# power bracket and the red roll bar clamps. got bracket for 60 and clamps for $40. Kinda expensive but gets it out of the way. Just have to wait till the end of week when I get them, then will post pics.
                                So after all that the tank wont fit in the space. only 15 and smaller will fit on the rollbar clamps. Will have to return the roll bar clamps. Mounted it to the pass wall by tail gate.
                                Ford Raptor 6.2l

                                Comment

                                Working...
                                X