Body mounts

[curtis]

Making some new body mounts. What do you guys think, good or bad ? Going to raise them 1".

[aw12345]

Nice mounts Curtis

[inVERt'D]

Look purdy good, but you're gonna need more than that

[curtis]

I'm hoping they will slide over the rocks better. Thanks guys.

[RAT]

Who's body are you mounting?? Is she cute??
Looks good Curtis

[daniel_buck]

Nice! I've been thinking about doing something similar to mine, especially for the middle mounts, mine are getting twisted :-\

[inVERt'D]

FWIW, I made mine tie into the top of the frame rails. I think that's even more important when they're using less real estate on the sides of the rails. Then again, depending upon what you do for roll cage tie-ins that may not be as critical.

Oh yeah, and you're going to need 5 more!

[curtis]

I think they need to be tied to the top of the rail also. will need to work that out.

[Toolman]

Before you go stamping them out for production make all three on 1 side then copy them because they will all be different. I tied mine to the top of the frame as well. Gained about 2 inches of clearance at the frame. It's a fun project that you can do 1 at a time, and if you do it right you won't have any down time.

[curtis]

Going to do the center two first and see how they work.

[dirtman13]

Looking good Curtis. I'll take 4.