Announcement

Collapse
No announcement yet.

Body mounts

Collapse

Forum Thread First Post

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Body mounts

    Making some new body mounts. What do you guys think, good or bad ? Going to raise them 1".





    IN A LAND OF FREEDOM WE ARE HELD HOSTAGE BY THE TYRANNY OF POLITICAL CORRECTNESS!!

    Better To Burn Out Than To Rust Out!

  • #2
    Nice mounts Curtis

    Comment


    • #3
      Look purdy good, but you're gonna need more than that
      holes = cowbell

      Comment


      • #4
        I'm hoping they will slide over the rocks better. Thanks guys.
        IN A LAND OF FREEDOM WE ARE HELD HOSTAGE BY THE TYRANNY OF POLITICAL CORRECTNESS!!

        Better To Burn Out Than To Rust Out!

        Comment


        • #5
          Who's body are you mounting?? Is she cute??
          Looks good Curtis
          [CENTER][COLOR=#ff0000]Resistance Off Road
          [/COLOR]Join the Resistance...
          http://www.resistanceoffroad.us[/CENTER]

          Comment


          • #6
            Nice! I've been thinking about doing something similar to mine, especially for the middle mounts, mine are getting twisted :-\
            [COLOR="#FF0000"]R[/COLOR]edneck [COLOR="#FF0000"]D[/COLOR]riveway [COLOR="#FF0000"]F[/COLOR]ab
            www.DanielBuck.net - www.DNSFAIL.com - www.FurnitureByBuck.com

            Comment


            • #7
              FWIW, I made mine tie into the top of the frame rails. I think that's even more important when they're using less real estate on the sides of the rails. Then again, depending upon what you do for roll cage tie-ins that may not be as critical.

              Oh yeah, and you're going to need 5 more!
              holes = cowbell

              Comment


              • #8
                I think they need to be tied to the top of the rail also. will need to work that out.
                IN A LAND OF FREEDOM WE ARE HELD HOSTAGE BY THE TYRANNY OF POLITICAL CORRECTNESS!!

                Better To Burn Out Than To Rust Out!

                Comment


                • #9
                  Before you go stamping them out for production make all three on 1 side then copy them because they will all be different. I tied mine to the top of the frame as well. Gained about 2 inches of clearance at the frame. It's a fun project that you can do 1 at a time, and if you do it right you won't have any down time.
                  You can lead a horse to water, but it might drown

                  Comment


                  • #10
                    Going to do the center two first and see how they work.
                    IN A LAND OF FREEDOM WE ARE HELD HOSTAGE BY THE TYRANNY OF POLITICAL CORRECTNESS!!

                    Better To Burn Out Than To Rust Out!

                    Comment


                    • #11
                      Looking good Curtis. I'll take 4.
                      Check out .

                      Comment

                      Working...
                      X