Sometimes it seems I've forgotten more than I remember when it comes to some things--like welding. I've been working on what for me is a fairly ambitious project (custom windshield frame) and haven't been 100% satisfied with my welding. I wound up on this site:
http://www.weldingtipsandtricks.com
There is a ton of useful, practical stuff here, and it's not dry techno-speak by any means. Just reading through his MIG welding tips, I learned a number of useful things, and was reminded of a number of key things I'd forgotten--like having the contact tip stick flush with or sticking out just slightly past the nozzle. Check it out:
http://www.weldingtipsandtricks.com/...-articles.html
http://www.weldingtipsandtricks.com
There is a ton of useful, practical stuff here, and it's not dry techno-speak by any means. Just reading through his MIG welding tips, I learned a number of useful things, and was reminded of a number of key things I'd forgotten--like having the contact tip stick flush with or sticking out just slightly past the nozzle. Check it out:
http://www.weldingtipsandtricks.com/...-articles.html
Comment