Announcement

Collapse
No announcement yet.

transfer case swap help

Collapse

Forum Thread First Post

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • transfer case swap help

    hey everyone,
    just wanted to see if anyone could help me install a 242 t-case in my 93 grand cherokee? I have the bezel, the green trans to transfercase seal, and the t-case. Let me know if anyone can help me out, i have no idea how to do it at all. This is my daily driver so i dont wanna try it by myself and not have a car.
    oh i'm in Santa Clarita.
    thanks
    mike
    93 grand, 33" pro comps, hp30, front long arms, front lock-rite.

  • #2
    try jim from JCFab. dukes will be able to help when he logs on too, and he'll probably move this thread to somewhere in long wheelbase.
    :gun:'99 TJ Sport:gun:

    Comment


    • #3
      Mike,
      I can only give you advice, I cant physically help you. This is a fairly cut and dry removal/install. Take the driveshafts off/out, remove wiring, prop up the t-case with a floor jack, undo the 6 or so bolts that hold the case to the tranny, slide the t-case back and down. Thats about it, install is the opposite. Good Luck.
      Last edited by JeepGal; 10-13-03, 07:58 AM.
      [COLOR=blue]Chris[/COLOR]
      SAVE JOHNSON VALLEY!!! - CLICK HERE
      Ya Savvy?

      Motech Performance

      Comment


      • #4
        Originally posted by Dukes69
        Mike,
        I can only give you advice, I can physically help you. This is a fairly cut can and dry /removalinstall. Take the driveshafts off/out, remove wiring, prop up the t-case with a floor jack, undo the 6 or so bolts that hold the case to the tranny, slide the t-case back and down. Thats about it, install is the opposite. Good Luck.
        You left out ........ Tear open 242 t-case ... Tear open 249 t-case , swap out input shafts, and carrier assembly , install seals , silicone the hell out of it . and also spend hours of time trying to figure out the shifter combo that will work , because Mike doesn't have all the parts . Then get yelled at by your wife because "freebies are not allowed anymore !!" other than that it is a simple install in a jeep that has not been butchered to death like a certain GC I wont mention

        But hay ,, He drove it home that night !

        JIM :{> <---- Mr. nice guy! )

        Comment


        • #5
          hey hey hey, its not butchered, but i am getting the linkage hopefully tomorrow. Thanks for all the help again.
          mike
          93 grand, 33" pro comps, hp30, front long arms, front lock-rite.

          Comment


          • #6
            Originally posted by stevo
            hey hey hey, its not butchered, but i am getting the linkage hopefully tomorrow. Thanks for all the help again.
            mike
            I am not Saying it was your GC I'm just saying I wont wheel behind you ( fear of driving over large chunks of metal )

            Comment

            Working...
            X