Atlas 4spd in the belly

[Britain]

Heres some pics of the ongoing summer mods

Atlas: Thanks Erik and Matt for test drive of your rigs
Sloppy low shift will be electrical with back up kill switch to prevent accidental shifting.
[SIZED]http://britain.connectnet.com/Photography/Mods/Atlas.jpg[/SIZED]
[SIZED]http://britain.connectnet.com/Photography/Mods/Atlas1.jpg[/SIZED]
Shifters not much work here Supe!
[SIZED]http://britain.connectnet.com/Photography/Mods/Shifters.jpg[/SIZED]
Stauns; Thanks for the help Brian!
[SIZED]http://britain.connectnet.com/Photography/Mods/Stauns.jpg[/SIZED]
Tube Fendors and new Rocker Guards: Thanks Erik for the new tube fendors, Chris need to see if those rockers hold up! Actually the flares on the fendors are to much will end up doing something here good for Gene Autry trails not close combat
[SIZED]http://britain.connectnet.com/Photography/Mods/Tubesandslider.jpg[/SIZED]
Heres the final hold up Hy Steer and Howe ram Steering
[SIZED]http://britain.connectnet.com/Photography/Mods/Howehisteer.jpg[/SIZED]
Did I mention new corner guards?:haha:

[blkTJ]

sweet. :thumbs_up :yay:

[sam 15]

Looking pretty good......let me know when you're up and running and we'll test her out

[Britain]

Looking pretty good......let me know when you're up and running and we'll test her out

Got a real goober going on here :wink: . TC easy the steering is being completly redone. I'm hoping to put the tires in something end of next week If not the following week. I'll let you know!

[Bachman]

Looks great!

Went wheeling with a buddy that just had his installed, T-case works great.
spit out a u-joint cap and grenaded his rear ring and pinion, but the 4 speed case worked great!!!:thumbs_up

[Joe Dillard]

Lookin' good.

[Britain]

Rear Drive Shaft update

The rear drive shaft is in and installed. I have had a lot of inquires about the extra length on the TC rear side. The picture is with long arms (re 5.5)extended and stopped by Rancho 9600's shocks.

[SIZED]http://britain.connectnet.com/Photography/Mods/rearshaft.jpg[/SIZED]

The yokes on the upper drive to TC are binding up. Nothing else is set. Trying to find some big mouth yokes to eliminate the bind, though the u's wont like that much.

The more interesting part of the project is the Hi steer with Howe ram steer. Even though I have Dana 60 Hi pin axels the concept will work with any one with 44's that have hi steer options on the knucs and want ram steer added. It is a lot of work but .........I'll post that later

[Britain]

All four on the ground

Finally all tires are on the ground. Some small issues with the ram steering being the hold up. Thats completed working good, even the Hi steer ok.

The low in the Atlas is really sic. Even when the trans is up shifted its way lower then many running in low.

I'm going to play tomorrow find some debre and start the testing.......Hope I dont end up like Supe

[Britain]

Test Run

Atlas:
Ran it over a stretch of boulders checking for any rear drive shaft binding problems looks good to go. Though lost the electric shift to sic low while messing around. Its so low you can get out go take a leak and get back in before it goes a foot. To hot to mess with it now.

[SIZED]http://britain.connectnet.com/Photography/Back.jpg[/SIZED]

Ram Steering:
Blocked the steering it into some off camber butted up boulders. Ram performed great it either pushed the jeep off the rocks or turned the wheels .

[SIZED]http://britain.connectnet.com/Photography/Howe.jpg[/SIZED]

Stuans aired down and up well. Need to finish up some rear lighting.

[sam 15]

Yeah...taht Jeep is looking good....in another couple of weeks in may be cool enough to do a short trial run. I still need to get mine up and running. I think I'll start looking for that D 60. Keep us up on the progress and when you want to go tear it up!

[Britain]

Yeah...taht Jeep is looking good....in another couple of weeks in may be cool enough to do a short trial run. I still need to get mine up and running. I think I'll start looking for that D 60. Keep us up on the progress and when you want to go tear it up!

Hey Rick,
Its basicly ready except for the rear lights to make it really legal on the street. Had a connector causing the electric drive to go out. Someones going to run Devils tonight Steve will be there I may show up but not run it though.

Hows those classes or have you started?

V

[sam 15]

Classes are going well-one week down 9 to go. I'll have to play weekends by ear.....DC is still at the top of my things to do....err.....complete

[blkTJ]

lookin' good vern. :yay:

[Britain]

lookin' good vern. :yay:

Thanks Mr B. Tomorrow I'm going to trash it in about 500ft of rock. I hope those rocker guards from Chris hold up. Thanks Chris for the support on those!

Only loose goose now is the sway bar system n F250 tow rig :wink: Going to look for some lost boats!

[Dukes69]

Thanks Mr B. Tomorrow I'm going to trash it in about 500ft of rock. I hope those rocker guards from Chris hold up. Thanks Chris for the support on those!

Only loose goose now is the sway bar system n F250 tow rig :wink: Going to look for some lost boats!

They might not hold up! I'll have to keep a tally of who has purchased them.


The Jeeps looking good.