ax5 trans problem

[4wheelinmike]

i have 1 2 5 and reverse. but no 3 or 4. i think the clutch is oil soacked if not any suggestions?

[6spdYJ]

94 should be AX-15. Can it go into the positions of 3-4? When the synchro keys on the AX-15 break, it will cause binding that won't allow it to shift into position. I found this out when I rebuilt mine. I was having trouble getting into 3rd. I ordered a rebuild kit (bearings, synchros and seals). When I got it apart is when I found that the keys are not included. That's what was broke. It was cheaper to have a set overnighted from JC Whitney than to get them from a local tranny shop.

[4wheelinmike]

isn't the ax5 for the 4cyl and the ax15 for the 6? but yes it can go into 3 4 fine i was driving and it just sounded like i pushed the clutch in and reved it in 3rd. i put it in 3rd and it didnt grab. i down shifted and it went into 2 and popped out then i put it back into 2 andit was fine

[fun4wheelerguy]

You are correct AX-5 is for the 4 cylinder version. This is typical failure for the ax-5. It will need to be torn down and inspected for needs.

Let me know if you need anything.... I rebuild them all of the time.

[OU812]

If you want to upgrade to the ax-15 I have one in my garage that is in need of a rebuild. It has the internal slave style bellhousing but that can be swapped of the external for another upgrade.

[4wheelinmike]

I asked the trans guy at work and he just laughed at me and said its about time. But I'll let you guys know, thank-you

[4wheelinmike]

You are correct AX-5 is for the 4 cylinder version. This is typical failure for the ax-5. It will need to be torn down and inspected for needs.

Let me know if you need anything.... I rebuild them all of the time.

I tore down and inspected it. The 3/4 hub is by problem. Where can I find just the hub? I found the seals and had the parts guy order them and the synchros as well. He just couldn't find the hub

[6spdYJ]

Check transtar industries. They have warehouses in southern California.

[4wheelinmike]

Thank you

[4wheelinmike]

By any chance do you guys have a diagram of the trans just for references or know where I can find one?
Thanks in advance

[OU812]

Not sure if this will work for you but here you go.
http://www.jeep4x4center.com/jeep-tr...in-ax4-ax5.htm