Originally posted by aw12345
View Post
Announcement
Collapse
No announcement yet.
Looking into a locker or trac lok for D35
Collapse
Forum Thread First Post
Collapse
X
-
Originally posted by Roger View PostI think you need to wheel more & do an in depth study on every type of locker & limited slip available. Write yourself a term paper on the subject, There's so much to learn and just asking for opinions isn't enough! Although you'll have no trouble getting opinions around here
You should go on runs for at leaset 6 months and really learn your Jeep and what it will & will not do. Lockers are serious business, a big expense, & expensive to repair. Make sure that whatever you decide is the right decision.holes = cowbell
Comment
-
Ron,
To answer your question to me, I have superior one piece axles and a trac-loc. I have an AMC 20 axle. They are better than a D-35. The pinion gear is much larger.
A future upgrade will be a locker in the front axle.SBCO Fire Dept. CERT volunteer
MJR moderator
MJR Adopt-a-Trail Crew member
Jeep Patrol Leader
Reforestation Supervisor
Licensed Ham - n6ujm
Eagle Scout
Comment
-
Originally posted by Roger View PostRon,
To answer your question to me, I have superior one piece axles and a trac-loc. I have an AMC 20 axle. They are better than a D-35. The pinion gear is much larger.
A future upgrade will be a locker in the front axle.
Comment
-
I would put a Aussie in the front before I put one in the rear. Front is usually the first to loose traction and when that happens you are just pushing forward into the rocks and not pulling yorself up over them. And I think I have said this before but... Don't over shim your TracLok! You will break your carrier.Those left standing
Will make millions
Writing books on ways
It should have been
-Incubus "Warning"
Comment
-
Originally posted by Jeep4cern View PostI thought you had a trac lok! I think I remember asking you out on that run. No issues? If you had your choice, trac lok or assuie locker for the rear?
Coming from my perspective I don't have a lot of $$ to spend on my Jeep. I just hate to see guys spend money on something and in a little while they wish they would have spend a little more on a better upgrade.
I've been really happy with the trac-loc. It's not for rock crawing though. I now feel more confident on some of the tougher trails. I'm only running 31" BFG AT's so I'm limited on tougher trails still.
David, you are right. I didn't think about it, but a trac-loc is a realitively inexpensive upgrade.
If you go that route Ron, just remember limited slips are not the best for rock crawling and it's not a traction cure-all!SBCO Fire Dept. CERT volunteer
MJR moderator
MJR Adopt-a-Trail Crew member
Jeep Patrol Leader
Reforestation Supervisor
Licensed Ham - n6ujm
Eagle Scout
Comment
-
Originally posted by OU812OU812 I would put a Aussie in the front before I put one in the rear. Front is usually the first to loose traction and when that happens you are just pushing forward into the rocks and not pulling yorself up over them.
Originally posted by RogerRon & David (inVERTed),
Coming from my perspective I don't have a lot of $$ to spend on my Jeep. I just hate to see guys spend money on something and in a little while they wish they would have spend a little more on a better upgrade.
I've been really happy with the trac-loc. It's not for rock crawing though. I now feel more confident on some of the tougher trails. I'm only running 31" BFG AT's so I'm limited on tougher trails still.
David, you are right. I didn't think about it, but a trac-loc is a realitively inexpensive upgrade.
If you go that route Ron, just remember limited slips are not the best for rock crawling and it's not a traction cure-all!holes = cowbell
Comment
-
Locking the front, does wonders for getting the front tires up and over rocks. For steep climbs you cannot beat a rear locker. So in the end you are going to end up with both. Truth be told if you are going to mess with it at all then gears, lockers and axle shafts, since one thing invariably leads to another.
Same thing still stands, go have some fun with your Jeep first, then since you like to wrench on it, fix the short comings you find when wheeling.
You want to have a bit more excitement let me or Fred know we will get you through whatever trail you chose and we will be gentle
Comment
-
The D30 is a tough little axle, I abused mine pretty hard and ot held up just fine. Yours is a high pinion which is better yet so yeah no worries there.
Still does not hurt for somebody to show you some of the ropes of wheeling, maybe go out with Mitch and Scott.
Those 2 intrepid desert explorers have a lot of fun out thereLast edited by aw12345; 08-23-09, 10:47 AM.
Comment
-
Originally posted by aw12345 View PostThe D30 is a tough little axle, I abused mine pretty hard and ot held up just fine. Yours is a high pinion which is better yet so yeah no worries there.
Still does not hurt for somebody to show you some of the ropes of wheeling, maybe go out with Mitch and Scott.
Those 2 intrepid desert explorers have a lot of fun out there
I said it as a joke, I hope you took it that way
Comment
-
Comment
-
Oh David! Which is better? Your Aussie or this one? I didn't see a locker for the D30 on the Aussie web site.
http://cgi.ebay.com/ebaymotors/DANA-...Q5fAccessories
Comment
Comment