Tweet
I picked up my yj today And I am verry pleased. I discovered that the 8.8 axle is a limited slip with 31 splint axle shafts and disc brakes. But on the top front of the diff there is a black electrical connector with two pins in it. Its not conneted to anything. At first I thought it was a breather but then I found the breather about half-way down the axle tube on the drivers side. The connector has a ford part number on it. Any ideas?
-
Those left standing
Will make millions
Writing books on ways
It should have been
-Incubus "Warning" -
Most likely a connector for abs brakes and or the speedo, Ford for awhile liked to run that from a reluctor wheel of the carrier -
That is the Vehicle Speed Sensor (VSS) used on all Ford 8.8 axles. You don't need it.'96 XJ, HP D30 front, XJ D44 rear, Lockright/E-Locker, 4.56's, Cobra CB, 33" Pro Comp xTreme MT's, SYE, Smittybilt XRC10 winch with Synth Rope, mutt lift.Comment
Comment