Announcement

Collapse
No announcement yet.

woohoo!

Collapse

Forum Thread First Post

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • woohoo!

    ok today i got some stuff accomplished. After my coil spring compressor incident everything went fairly smooth. Got my V8 ZJ coils in and got an extra inch of lift in the front, now im waiting on a 2inch AAL to get rid of my block in the rear. I also did some fender hackage. The back looks kinda messed up because i didnt just cut the fender off because there are spotwelds that hold the rear fender panal to some other crap so i made vertical cuts and hammered it back. For the front i just cut about an inch off and it turned out look very nice. The front looks like it has room for 32s except for rubbing when turning. Also decided since i have about 3 inches of lift i was gonna figure out how to extend my sway bar links a bit so my cheap $5 discos still work. Well i took a half threaded 1/2" bolt and cut the head off and the threads which left me with a 2 inch smooth section, then i cut the sway bars and welded the bolt in. Worked out well. Painted em red and now they are ROCKIN!!
    B R E T T
    87 XJ 3" lift, 31s-thats all thats worth mentioning

  • #2
    Right on Dude! I think I did the same thing on my rear fenders, excdpt a sledge hammer was my weapon of choice!

    Lets see some pics!
    [COLOR=blue]Chris[/COLOR]
    SAVE JOHNSON VALLEY!!! - CLICK HERE
    Ya Savvy?

    Motech Performance

    Comment


    • #3
      Painting red always makes things work better, I know painting my ZJ VB Coil Springs red is going to give me xtra inch of lift

      Seriously, red just looks cool!
      Michael

      [sign]nlm mln[/sign]

      Comment


      • #4
        lets see some pics!
        >>>>>>>>>>>>>>>>>>>>>>>>>>
        ERIK


        95 yj, locked lifted, and ready to rock!

        Comment


        • #5
          ok pics.....

          Red Swaybar links;


          Front fender chop;


          Rear fender chop;(wow you can really see the dent in my door...stupid tree)


          Here is my CB mount i made today. It was up on top of my roof rack but it was WAY to high. I used a piece of flat iron and welded it to a little piece of 1/2" square tubing so i could use the mount i had, works perfectly.




          From the ground to my front fender lip is 36 inches, and from the ground to the rear fender lip is 34 inches...hopefully when i get my AAL and get rid of my block i can make em close to even.
          B R E T T
          87 XJ 3" lift, 31s-thats all thats worth mentioning

          Comment


          • #6
            Nice work. Looks like the jeepy is coming together quite nice.

            Comment


            • #7
              atta boy!
              [COLOR=blue]Chris[/COLOR]
              SAVE JOHNSON VALLEY!!! - CLICK HERE
              Ya Savvy?

              Motech Performance

              Comment


              • #8
                now im just waitin on my 31s
                B R E T T
                87 XJ 3" lift, 31s-thats all thats worth mentioning

                Comment


                • #9
                  Sawsall + 33's = WINNER!

                  [COLOR=blue]Chris[/COLOR]
                  SAVE JOHNSON VALLEY!!! - CLICK HERE
                  Ya Savvy?

                  Motech Performance

                  Comment


                  • #10
                    Originally posted by Dukes69
                    Sawsall + 33's = WINNER!


                    i could work the front....but the back would be tough.
                    B R E T T
                    87 XJ 3" lift, 31s-thats all thats worth mentioning

                    Comment

                    Working...
                    X