death wobble at 30

[98thunderjeep]

i am getting the death wobble at 30 mph. i have made sure everthing is tight, anybody else have this problem? how did you fix it so i can attmpt to solve mine

[aw12345]

If everything is tight and the tires are balanced, then make sure the caster is not to high. Stay under 5 degrees
See Stu Olsons website on how to do a simple alignment

[Lumpy Grits]

Hi, jack your rig up and spin the wheels to be sure you don't have a bent one. Any more side to side wobble of 3/16" it could be a bent rim or the tire was not "laid" right when it was made(are these tires NEW?)OR it MAY be the start of a tire seperation issue.
IF this all checks OK, have the front end checked out by a shop and have'em get it back into spec.
Good luck.
Respectfully,
LG

[98thunderjeep]

i jacked up my jeep and found that the bolts on the bottom of the knuckles where loose and i adjusted the caster. finally its rollen right thanks for the advise if i would have never considerd casters i would have never see the knuckle nuts and there looseness

[aw12345]

Glad that you got it fixed