Cheeroke ?

[smashcoast]

What years are the best to buy?

One with D44 and good trans?

[xjkevin]

*

[edit] 1984-1996

Designs of the XJ Cherokee date back to 1978 when a team of American Motors (AMC) and Renault engineers drew several sketches. A few clay models were based on the existing SJ Cherokee. Early sketches of the XJ Cherokee had a European influence, and most of the styling cues were done by AMC engineers under the direction of Richard Teague. The ongoing debate suggests that Renault sketch artists were involved right after the 1979 partnership with AMC.[citation needed] Noticing that General Motors was developing a new two-door S-10 based Blazer, AMC decided to design an entirely new four-door model, but worried about rollovers, Gerald C. Meyers hired one of Ford's best engineers, Roy Lunn to design what is known as the Quadra-Link suspension.[5] François Castaing developed the drivetrain using a much smaller engine than normally found in 4WD vehicles and reduced the weight of the new model,[6]
1984-1990 Jeep Wagoneer (XJ platform)
1994–1997 Jeep Cherokee (XJ) Sport (Australia)

The XJ Cherokee introduced in 1984 was the first Jeep with a ladder-boxed chassis integrated into a single monocoque unit rather than the traditional separate body-on-frame construction.

Both two- and four-door versions of the XJ Cherokee were offered throughout its lifetime, each having exactly the same track and wheelbase measurements. Two-door models, however, received longer doors and front seats that could fold forward to assist in rear passenger entry and exit. This was in addition to extended-length rear windows that did not open, although an optional rear vent window was available on some models. Its appearance has led some to mistakenly believe that the two-door models are a short wheelbase version of the four-door.

A variation on the Cherokee from 1984 through 1990 was the Jeep Wagoneer. These were unrelated to the similarly named full-sized Grand Wagoneer models that had carried the Wagoneer name before this point in time. The compact XJ Wagoneer was available in two trim levels: the "Wagoneer" and the "Wagoneer Limited". Both Wagoneers were distinguished from the Cherokee models by their two vertically-arranged headlights on both sides. The Wagoneer Limited came with vinyl wood trim on the sides and leather seats embossed with "Limited".

This version was the first to be sold in Europe; it was launched in 1992 in some markets, 1993 for the United Kingdom. Early versions had the 4.0 L (242 CID) six-cylinder engine only: the 2.5 L (150 CID) engine did not arrive in Europe until 1995.

In mid-1985, a two-wheel-drive version of the Cherokee was added to the line-up. This marked the first time any Jeep product was offered with two-wheel-drive since 1967, and was done in the hopes of attracting a few more buyers who didn't need (or want to pay for) four wheel drive. When the XJ Cherokee based Comanche (MJ) truck was introduced it was also available in two and four wheel drive. The new two wheel drive models shared the front suspension with four wheel drive models. Jeep simply used a single axle tube from hub to hub with no differential between, resulting in a low added cost front suspension.
1993-1996 Jeep Cherokee XJ (Japan)

American Motors's compact XJ Cherokee was to be replaced by a new and larger model known as the ZJ (later named the Jeep Grand Cherokee when introduced in 1993) that was under development by AMC.[7] However, the smaller model's continuing popularity caused Chrysler executives to rethink this decision, and while the ZJ models were introduced in 1993, the XJ models were retained until 2001. The Jeep XJ has remained a popular choice by off-roading enthusiasts due to its potent off-roading capability in stock form. Its popularity has resulted in strong ongoing aftermarket support in the form of a wide variety of products and upgrade availability.
[edit] Engines

* 1984-1985 2.5 L, 150 CID AMC 150 I4, Carbureted 105 hp (78 kW)
* 1986-1990 2.5 L, 150 CID AMC 150 I4, TBI (fuel injected) 117 hp updated in 87-90 to 121 hp (90 kW)
* 1984-1986 2.8 L GM 60° LR2 V6, 110 hp (82 kW)
* 1985-1987 2.1 L Renault turbodiesel I4 (initially sold in U.S. and until 1993 in Europe)
* 1987-1990 4.0 L, 242 CID AMC 242 I6, 173 hp (129 kW) with Renix fuel injection system
* 1991-1996 4.0 L, 242 CID AMC 242 "High Output" I6, 190 hp (142 kW) with Chrysler fuel injection system
* 1994-1996 2.5 L VM Motori turbodiesel with intercooler I4, 118 hp (88 kW) (sold in Europe and South America)

HP 280, LB 350
[edit] 1997-2001
1997-2001 Cherokee Sport 4-door
A 1997 Cherokee XJ on a rally in Morocco

After 13 years of production, 1997 saw the Cherokee receive updated exterior and interior styling. Both the two- and four-door bodies remained in production, receiving a steel liftgate (replacing the fiberglass one used previously),a new taillight design, additional plastic molding along the doors, as well as a new front header panel that featured more aerodynamic styling.

The interior was similarly updated with an all-new design and instruments, and a stiffer unibody frame brought improvements to Noise, Vibration, and Harshness (NVH) measurements. Also contributing to NVH improvements were new door seals that reduced wind noise at higher speeds.

In the middle of the 1999 model year, vehicles with the 4.0 liter (242 CID) engine received a much improved intake manifold. This was done to help counteract smaller exhaust porting on the latest casting of cylinder heads, which was done to meet more stringent emissions control laws. Both the 4- and 6-cylinder engines were offered through the 2000 model year, though only the straight-six was available in 2001. For the 2000 and 2001 model years, all six-cylinder XJs received a distributorless ignition system using coil-on-plug ignition replacing the 'traditional' system previously used; coupled with better exhaust porting and the newer intake manifolds, this gave a minor increase in power over the previous models. Transmission, axle, and transfer case choices were carried over from the previous models.

However, major changes were underway with a new executive, Wolfgang Bernhard, who was known as a "cost-slasher" nicknamed "whirlwind", came from Mercedes-Benz to turn around Chrysler.[8][9] "One of the first moves Bernhard made when he came to Chrysler in 2000 was to help kill the Jeep Cherokee, an aging, somewhat bland SUV."[10] Thus, the (XJ) Cherokee line was replaced in 2002 by the Jeep Liberty (KJ) , although it is called the "Cherokee" in most foreign markets.

When (XJ) Cherokee production ended in mid 2001, the portion of the Toledo South Assembly Plant devoted to its production was slowly torn down.
[edit] Engines

* 1984-1985 2.5L (150 CID) I4 carbureted - 105 hp (78 kW) @ 5000 rpm, 132 lb·ft (179 N·m) torque @ 2800 rpm
* 1986-1990 2.5L (150 CID) I4 TBI (fuel injected) - 117 hp (87 kW) @ 5000 rpm, 135 lb·ft (183 N·m) @ 3500 rpm updated in 87-90 to 121 hp (90 kW)
* 1991-2000 2.5L (150 CID) I4 MPI (multi-port injection) - 130 hp (97 kW) @ 5250 rpm, 139 lb·ft (188 N·m) @ 3250 rpm
* 1984-1986 GM 2.8L V6 - 115 hp (86 kW) @ 4800 rpm, 145 lb·ft (197 N·m) @ 2400 rpm
* 1985-1987 Renault 2.1L 4cyl. Turbo Diesel - 85 hp (63 kW) @ 3750 rpm, 132 lb·ft (179 N·m) @ 2750 rpm

* 1987-1990 4.0L (242 CID) I6 RENIX FI 242ci - 173 hp (129 kW) @ 4600 rpm, 224 lb·ft (304 N·m) @ 4000 rpm
* 1991-1995 4.0L (242 CID) I6 MPI (High Output) - 190 hp (142 kW) @ 4600 rpm, 235 lb·ft (319 N·m) @ 3200 rpm
* 1996-1999 4.0L (242 CID) I6 MPI (High Output) **Chrysler Block Cast** - 190 hp (142 kW) @ 4600 rpm, 235 lb·ft (319 N·m) @ 3200 rpm
* 2000-2001 4.0L (242 CID) I6 MPI "Power Tech" - 193 hp (144 kW) @ 4600 rpm, 243 lb·ft (329 N·m) @ 3200 rpm

Foreign Engines

* 1984-1986 2.1 L Renault turbodiesel I4
* 1997-2000 2.5 L (150 CID) AMC 150 I4, 130 hp (97 kW)
* 1997-2001 2.5 L VM Motori turbodiesel I4 (sold in Europe, Australia and South America)
* 1997-1999 4.0 L (242 CID) 242 I6, 190 hp (142 kW)
* 2000-2001 4.0 L (242 CID) 242 Power Tech I6, 193 hp (144 kW)

Not available in the US Italian VM 2.5L Turbo Diesel - 140 hp (104 kW), 236 lb·ft (320 N·m) torque
[edit] Trim levels

* Base - 1984-1993
* SE - 1994-2000
* Wagoneer - 1984-1990
* Briarwood - 1991-1992
* Pioneer - 1984-1990
* Pioneer Olympic Edition - 1988
* Chief - 1984-1990
* Sport - 1988-2001
* Country - 1993-1997
* Classic - 1996, 1998–2001
* Limited - 1987-1992, 1998–2001
* Laredo - 1985-1992
* Freedom - 2000
* 60th Anniversary - 2001

[edit] Available driveline components
[edit] Manual transmissions

* 1984-only : Borg-Warner T-4 4-speed manual, used with 2.5 L I4 only, 21 spline output.
* 1984 – 1987 : Aisin-Warner AX4 4-speed manual, used with 2.5 L I4 only, 21 spline output.
* 1984-only : Borg-Warner T-5 5-speed manual, used with 2.5 L I4 and 2.8 L V6, 21 spline output.
* 1984 – 2000 : Aisin-Warner AX5 5-speed manual, used with 2.5 L I4, 2.1 L I4 diesel, and 2.8 L V6, 21 spline output.
* 1987 – Mid-1989 : Peugeot BA-10/5 5-speed manual used with 4.0 L I6, 21 spline output.
* Late-1989 – 1999 : Aisin-Warner AX15 5-speed manual, used with 2.5 L I4 diesel, 4.0 L I6, 23 spline output.
* 2000 – 2001 : New Venture Gear NV3550 5-speed manual, used with 2.5 L I4 diesel, 4.0 L I6, 23 spline output.

[edit] Automatic transmissions

* 1984 – 1986 : Chrysler A904 3-speed automatic, used with 2.5 L I4 and 2.8 L V6.
* 1987 – 2001 : Aisin-Warner AW-4 4-speed automatic, used with 2.5 L I4 and 4.0 L I6.
* 1994 – 2000 : Chrysler 30RH 3-speed automatic, used with 2.5 L I4.

[edit] Transfer cases

All the transfer cases used on the Cherokee were chain driven with aluminum housings. Command-Trac was standard on XJ models built with 4WD.

* 1984 – 1987 : New Process NP207 "Command-Trac", part-time only, 2.61:1 ratio with low range
* 1987 – 2001 : New Process NP231 "Command-Trac", part-time only, 2.72:1 ratio with low range
* 1987 – 2001 : New Process NP242 "Selec-Trac", full-time/part-time, 2.72:1 ratio with low range

[edit] Axles

The Jeep XJ utilizes front and rear solid (live) axles as opposed to independent front and/or rear axles. This configuration allows the XJ to have superior off-road capability and performance at the expense of some on-road comfort and drivability. Mid-1985 and later two wheel drive models used the same basic suspension with a single tube connecting axle ends with no differential.
[edit] Front Axle

* 1984 – 1996 : Dana 30, High Pinion, Reverse Cut, 27-spline axleshafts (1989 – 1995 : with ABS used 5-297x universal joints, non-ABS had 5-260x universal joints. Note: Certain XJ models were produced with constant-velocity joints instead of universal joints.)
* 1996 – 1999 : Dana 30, High Pinion, Reverse Cut, 297x/760 universal joint, 27-spline axleshafts.
* 2000 – 2001 : Dana 30, Low Pinion, Standard Cut, 297x/760 universal joint, 27-spline axleshafts.
* 1985 – 2001 : Straight non-driven front axle for two wheel drive only.

[edit] Rear Axle

* 1984 – 1989 : Dana 35, non c-clip, with anti-lock braking system (ABS) or non-ABS.
* 1990 – 1996 : Dana 35, c-clip, ABS or non-ABS.
* 1997 – 2001 : Dana 35, c-clip, ABS.
* 1991 – 1996 : Chrysler 8.25", c-clip, non-ABS, 27-spline axleshafts.
* 1997 – 2001 : Chrysler 8.25", c-clip, non-ABS, 29-spline axleshafts.
* 1987 – 1990 : Dana 44, non-abs, 30-spline axleshafts.

[edit] Axle Gear Ratios

Jeep XJs came in several standard gearing ratios:

* 3.07:1, manual transmission, I6 engine.
* 3.54:1, automatic transmission, I6 engine with Dana 44 rear differential.
* 3.54:1, manual transmission, I4 diesel engine with Dana 35 rear differential.
* 3.55:1, automatic transmission, I6, V6 engines; manual transmission, I4 engine.
* 3.73:1, automatic transmission, I6, Tow Package, UpCountry Package.
* 4.10:1, manual transmission, V6; automatic transmission, I4 engine.
* 4.56:1, automatic transmission, I4, offroad or tow package.

[edit] Suspension

The Jeep XJ utilizes a coil spring front suspension with a leaf spring rear suspension.
[edit] Front Suspension

The Jeep XJ utilizes the Quadra-Link front suspension. This suspension design locates the axle with four control arms to control up and down movement, two above the axle and two below it. A panhard rod, also referred to as a track bar, is used to locate the axle central to the vehicle. Two coil springs are seated on top of the axle housing as well as two gas-charged shock absorbers. A sway bar is utilized to reduce body roll in turns.
[edit] Rear Suspension

The XJ uses a leaf spring rear suspension. Each leaf pack contains four leaf springs with a fixed eye at the front of the spring and a shackle at the rear of the spring. Two gas-charged shock absorbers are also used, along with a mild anti-sway/anti-roll bar. The suspension used on vehicles with the optional UpCountry Package did not employ the rear anti-sway/anti-roll bar and provided one inch of lift over the standard suspension.

[rockhead]

My opinion

97-99 1st choice
29spl 8.25 /HP 30 with larger joints. Look better

far second would be a dana 44 equipped renix injected 87. Would have to be clean though.

[OU812]

My opinion

97-99 1st choice
29spl 8.25 /HP 30 with larger joints. Look better

far second would be a dana 44 equipped renix injected 87. Would have to be clean though.

X2. But damn Keven. Thanks for all the info.

[LEADFOOTjosh]

i have personally owned..

84 V-6 5speed 4 door
89 I6 Auto 4 door
92 4cyl 5speed 2 door
95 I6 Auto 4 door
98 I6 Auto 4 door

and currently have a

2000 I6 auto 4 door.. which.. happens to be my Fav..

Mine doesnt have a HP30 in it. but I have yet to see any disadvantage with all the wheelin and crap this Xj has gone over..

but.. other than my 98 had electical issues.. id get a 97 or newer..

but.. really if its a 92 or newer... with the 4.0l High Output.. & a 8.25 rear end.. id say your off to a great start..


good luck..