Like Jim, I have a preference for Miller.
I owned a Lincoln WeldPac 110 and upgraded it to a Hobart 135 w/Gas. Inner shield is OK for small projects once in a while and it is portable, but it does not do as good as solid wire w/Gas.
I also have a Miller ThunderBolt XL for my ARC needs (up to 225A).
I also have the Miller 625 Plasma Cutter. I've been thinking of junking the Hobart and Thunderbolt XL in favor of a bigger Miller MIG/TIG machine. Still thinking about it.
Any of the Name Brand machines are good, you just have to research what you want to do versus how much machine you can afford.
Announcement
Collapse
No announcement yet.
Which Welder?
Collapse
Forum Thread First Post
Collapse
X
-
Originally posted by cbremer
that explains the wrought iron rocker guards
It wasnt me it was the welder I was using!! Damn lincoln mig pak 100, doesnt like 3/16's :p
Time spent on rock rails = 2 hours
:p :confused:
dont look too closely, cause they're ugly, but they work . . . sorta
Leave a comment:
-
Originally posted by jim79cj7
It Basically comes down to prefferance . My personal pref is Miller Welders I own a few . Hobart is now Being produced By miller So pick a color basically . Lincoln makes a fine product ! Just not my favorite , Also ... Really look into it , if you think your only gonna weld 1/4" , buy a welder capable of 3/8" Always buy "more" than you need . If your welder is "Capable" of Single pass 1/4" welds you will be running at max levels when trying to weld 1/4 " passes . save your money a little longer and by a bigger machine . Right now I am saving for a Big Tig !!! ( Miller of course )
JIM :{>
-Chris
Leave a comment:
-
Guest repliedIt Basically comes down to prefferance . My personal pref is Miller Welders I own a few . Hobart is now Being produced By miller So pick a color basically . Lincoln makes a fine product ! Just not my favorite , Also ... Really look into it , if you think your only gonna weld 1/4" , buy a welder capable of 3/8" Always buy "more" than you need . If your welder is "Capable" of Single pass 1/4" welds you will be running at max levels when trying to weld 1/4 " passes . save your money a little longer and by a bigger machine . Right now I am saving for a Big Tig !!! ( Miller of course )
JIM :{>Last edited by jim79cj7; 05-31-03, 12:16 AM.
Leave a comment:
-
220V or 110V
I am thinking about a little 110 mig, cuz i'm really only going to use it for smaller stuff. Opinions? I know Nailer has a 110 and seems to like it. I guess the 220 are worth the extra $$ if you need to weld anything over about 5/16" thick. Likewise, i would like to know what brands are worth their salt.
Leave a comment:
-
Which Welder?
I'm looking at a couple different welders. The ones I'm looking at are of the 250 amp variety, from Miller, Lincoln, and Hobart. Anyone have the good, the bad, and the ugly on these?
-ChrisTags: None
Leave a comment: