Ba10/5 to ax15 swap

[4rheel]

It's time to upgrade my tranny, has anyone done this swap? I have an ax15 and np231 sye sitting in my garage. looking for helpful hints to make the swap go smoothly. or a good writeup. what bushing do i use in the flywheel? ect...
any help would be appreciated. 87yj.
Rich.:gun:

[4rheel]

56 views and not one reply? i'll figure it out

[calkid]

No such luck

Sorry Rich, I've never done that swap before. Hard to believe nobody else has either.

[itsmy49willys]

http://www.4wheeloffroad.com/techart...eep/index.html

does this help?

[6spdYJ]

It depends on if you are going to the external slave. Get a bellhousing from a 94 to 98 with matching throwout arm, bearing and slave. You will need a hyd tube from the master cyl to slave from a 94 to 98.
If you're going internal, get the slave that matches the bellhousing and the hyd tube.
This is assuming the 258 in the 87 YJ. The rest should be plug and play.