powertrax problem

[NAILER341]

i have the arb locker in my posession, as well as the installation kit. i will prep the air lines from the york to accept the air locker solenoid today if the rain lets up enough. i am dropping it off at jims shop tomorrow afternoon for a friday install. so things are still very up in the air. i think it mostly depends on how big of a pain in the ass it is for jim to get the damaged no-slip out of there. hopefully it will be ready friday evening. which still leaves a bit of a break in for the gears.. hell, i dont know. things are very tight

[Dukes69]

Eff the rain
Get on it!!!

[codfish]

oh bummer dooood you broke a powertrax?! those are sopposed to be really tough!

[NAILER341]

i'll get it done before i go... rain or no rain. i have all of the parts for the connection.. i just have to put them on the jeep. shouldnt take more than 20 minutes
i am debating running another small coalescing filter before the arb. do you think it is needed? i already have very little oil in my air from the york. but i do have another small filter in my posession.

it will be set up something similar to this.

[Dukes69]

I'd run another one, just to be safe. I hear ARB's really dont like oil.

[NAILER341]

so, i'll just tee off of the main line, attatch the mini-coalescing filter, then the regulator, and tie the solenoid to that
piece of cake!
is it still raining?!

[Dukes69]

Originally posted by NAILER341

is it still raining?!

No!!

[Dukes69]

Oh, think about this. If there is a leak in a line somewhere, you'll have to keep the york on and cycling to keep the psi up. I dont know if the york is up to that . . . or is it?

[tjTerry]

Nice CAD work Nailer.
I am going to have to figure how to get air to my new ARB too. My compressor is elec with on/off switch and an preasure relief valve. I need to find a 12volt preasure switch and install. Mine is currently designed just to air up tires, so there was no need to keep a constant preasure.
Does anyone have a idea where to get a 12v preasure switch @ 100psi?
Thanks

T

[igofshn]

You should be able to get it from Grainger or Kilby.

[NAILER341]

you can get an adjustable pressure switch. i'm sure kilby has one of those.
i cant take credit for the cad work on that drawing. found it on the net.
i do cad... but that isnt mine

[tjTerry]

I have a Grainger catalog at the office. I will check it out . Where do I find Kilby?

[NAILER341]

www.onboardair.com

[NAILER341]

www.jcfabanddesign came through for me in a pinch. i am up and running again with an arb air locker. THANK YOU! i will be posting some pics of the powertrax no slip when i get a chance to take them. it was pretty buggered up, but jim was able to get it out without the torch

[sarah]

AWESOME!! Rock on Jimmy da man!!!!