I have an 85 CJ7 with a new (rebuilt) carter BBD. It starts fine but when warmed up it dies. The choke is not opening. I tested the voltage to the choke coil and it's getting 12v. I pulled off the choke coil and connected it to a 12v source and it heats up and the coil and relaxes the spring. My problem is I can't seem to get the choke coil back on correctly so that the choke opens at temp. Any ideas?
Announcement
Collapse
No announcement yet.
Ready to choke my choke!
Collapse
Forum Thread First Post
Collapse
X
-
This web site has a lot of good testing practices and may be able to help you track down the problem.
http://home.sprynet.com/~dale02/home.htm
One of the other CJ7 owners posted it earlier and it really does have a lot of info.
Comment