Announcement
Collapse
No announcement yet.
Leaking Transmission - picture - Help!
Collapse
Forum Thread First Post
Collapse
X
-
The seal job isn't that hard, the main prob is going to be manouvering it around the exhaust... that and having to unbolt everything.. just don't forget to unplug the reverse switch, took me a month to realise i'd pulled mine out!
-
Originally posted by paultylerI have a Haynes manual. How hard would it be for me to change the front seal myself? And that was my thought as well, Dukes69. Same leak showing in two places--but the same seal involved for both.
Leave a comment:
-
I have a Haynes manual. How hard would it be for me to change the front seal myself? And that was my thought as well, Dukes69. Same leak showing in two places--but the same seal involved for both.
Leave a comment:
-
If its trans oil then for the first one I would say front input shaft seal. Someone might need to correct me on this one, but I think the bellhousing is seperate from the tranny. So most likely its the same leak, just spread out. HTH.
Leave a comment:
-
Leaking Transmission - picture - Help!
92 YJ manual tranmission. I am leaking a lot of tranmission gear oil. It is coming from two places. First, it is dripping out of the bellhousing that attaches to the tranny. The leak is inside the bellhousing area and is dripping out of the bellhousing.
Second, I can see a slight leak from the outside of the transmission where the bellhousing meets the tranny. So it seems like the leak is visible both from the outside and also exists on the inside of the bellhousing in the same basic place.
Could this simply be a seal? You can see where it is leaking in the picture. And I am sure it is gear oil.
Click this link for a picture:
www.tylerlaw.com/Leak.JPGTags: None
Leave a comment: