Announcement

Collapse
No announcement yet.

any info on wheel joints

Collapse

Forum Thread First Post

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • NAILER341
    replied
    for the front axle joints, just pull the axles out, and press out the old u joint, and press in the new. as far as removing the axles... remove the wheel, brake caliper, rotor. then remove the 3 bolts that hold in the uni bearing. this can sometimes be a pain in the ass to get free from its rusted home. you might get lucky though.
    once you get this apart, press out the old, and press in the new.
    a chiltons manual is your friend for disassembly, and reassembly of these things.
    repost if you need more info
    get a press from auto zone, or your local auto parts store
    replace with SPICER parts. dont use off brand u joints.
    this is too big a pain in the ass to do often, so use the good SPICER joints

    Leave a comment:


  • NAILER341
    replied
    what do you mean by "wheel joints"?
    are you referring to the u-joints on the front axles? or the wheel bearings?
    welcome to the forum :yay:

    Leave a comment:


  • rayjdawg
    started a topic any info on wheel joints

    any info on wheel joints

    Hey MJR guys anyone out there ever change the wheel joints on a 88 wrangler, If so can someone give detail desciption on how and what has to be doneto complete this job! ANY HELP WOULD BE GREAT. I think you guys know your stuff from what Ive read in your forum. Thanx (NEW JEEPER) AND STARTING TO LIKE IT THANX TO MJR!
Working...
X