Announcement
Collapse
No announcement yet.
What do I call the seal I need?
Collapse
Forum Thread First Post
Collapse
X
-
The 1985 Grand Wagoneer has a tube OD of 3". The inner axle seal has a 2 5/8" (2.62, 2.622, 2.63) The part number is 2300 for all manufacturers, Timken, National, Duralast (Autozone), MasterPro (O'Reilly)
-
Well... I've found the Scout seal is Crown J8124832. It cross references to national or duralast 5131. It has 1.31 ID with 2 1/4" OD
Still hunting down the Wagoneer seal. All I find are 2 1/4", 2 5/16" & 2 5/8". The Wagoneer tube is 3" OD with 5/16" walls - making the OD I need 2 3/8" (2.375).
Leave a comment:
-
What do I call the seal I need?
I'm trying to find axle shaft seals for the inner end of the shaft (by the carrier). It seems every vendor calls them "wheel seal, inner". Last time I checked, the wheels go on the ends of the tubes - not in the middle. Am I missing something?
When I search this description the only images I see are for either the hub bearings for a Dana 44 with manual hubs or outer seals.
If anyone has some valid part numbers I would appreciate it if you could post them.
I have a 1974 ScoutII rear 44 and a 1985 Grand Wagoneer front 44.
Thanks for any help!Tags: None
Leave a comment: