Professional Mechanic Help ARB install...

[Max7]

Did I hear someone mention running the "Hairy Crack" Trail again?

Do I need to come over and supervise???

After I get this ARB in I'll put something together!
LOL Best, Max7

[aw12345]

Max what works better for ya, this Saturday or Sunday?
I could be there around 11 am or so, what to say I hate mornings also see if you can find one of these
At harbor freight http://www.harborfreight.com/cpi/cta...emnumber=93488 preferably one cheaper than this

that and a piece of steel plate or a flat surface
Makes it a lot easier to figure out the thicknes of the shim packs. it can be done without but if you find this cheap enough it makes it very easy to get it close. Just hate to see you blow more money than absolutely necesary.

Anyway let me know which day works best for ya.

Talk to you later

[1 Bad F N Z]

Sunday!!!!!!!!!!!!!!

I want to come and see how you do this. PLEEEESE, Kevin.

[Mitch]

Art,

Great install photo's. I've seen you drive, so where is the skid for the airtank? I need to get a job so that I can get some air lockers, updated axles, 35's, HD steering pump, ......... Well you know the story.

Max,

Let me know if you need ant help with this. I'm kinda limited in the mechanical department but...

Mitch

[aw12345]

Mitch in all the beating around with my little putput it has only scraped the airtank barely just once on JohnBull and as you have seen the little Jeep has hopped over some pretty decent size rocks, I have tought about extending the bellyup skid but would be hard to make it strong enough.

[Max7]

Max what works better for ya, this Saturday or Sunday?
I could be there around 11 am or so, what to say I hate mornings also see if you can find one of these
At harbor freight http://www.harborfreight.com/cpi/cta...emnumber=93488 preferably one cheaper than this

that and a piece of steel plate or a flat surface
Makes it a lot easier to figure out the thicknes of the shim packs. it can be done without but if you find this cheap enough it makes it very easy to get it close. Just hate to see you blow more money than absolutely necesary.

Anyway let me know which day works best for ya.

Talk to you later

Sunday is fine around 11, if that is good for you. I'll try to get that tool too.
Best, Max7

[aw12345]

Well then Sunday it is Max, as long as the pass is open. See ya then

[Max7]

I'll keep track of the weather and make adjustments to it as necessary.
Thanks again!
Best, Max7

[scaffoldman]

locker install

are there any seats left in the penut gallery? Good excuse for pizza and a cold one.

[RAT]

Max what works better for ya, this Saturday or Sunday?
I could be there around 11 am or so, what to say I hate mornings also see if you can find one of these
At harbor freight http://www.harborfreight.com/cpi/cta...emnumber=93488 preferably one cheaper than this

that and a piece of steel plate or a flat surface
Makes it a lot easier to figure out the thicknes of the shim packs. it can be done without but if you find this cheap enough it makes it very easy to get it close. Just hate to see you blow more money than absolutely necesary.

Anyway let me know which day works best for ya.

Talk to you later

Max/Art,
I have a height gauge you can use. If you need it, I'll meet you half way somewhere. I have to work on my heep this weekend too ya know...

Call me if you need it.

[aw12345]

Hi Kurt you could drop it of at my house before sunday if you are in the neighborhood

[RAT]

Hi Kurt you could drop it of at my house before sunday if you are in the neighborhood

I planned on working on my jeep and 4x4freinds jeep this weekend so I have to get it to you by Friday. What time are you going to be home on Friday? I suppose I could leave it at the side of the house but this thing cost me major bones, so that makes me nervous.

[aw12345]

Be home all afternoon Kurt

[RAT]

Be home all afternoon Kurt

cool beans. You CAN work in Metric, right?

[Max7]

Thank you!

Thanks Rat... I was just contemplating whether to buy the H.F. version on Sat. or hold out for the real deal it will be great to learn with a quality tool! Thanks for the loaner! Art, as well... thanks for the great coordination and logistics, looking forward to the project! Thanks again guys!
BTW, Rat are you missin'some shades?
Best, Max7